Seven production packs across three voltages and four capacities — each built on the same BMS firmware and the same field-serviceable chassis. Pick by voltage and runtime; we'll handle the rest.
48V for telecom-on-the-pad, full-pad SCADA, and hybrid solar/generator cabinets. The standard in modern pad design.
Compact 48V 60Ah pack for telecom-on-the-pad, VSAT terminals, and remote SCADA cabinets where rack space is tight.
Most deployed 48V pack. 5kWh of usable energy for production-allocated LACT skids, RTUs, and full pad SCADA.
Flagship 48V 200Ah pack. 10kWh class capacity for off-grid telemetry hubs, pump-off controllers, and gas compression skids.
24V for the workhorse loads — chemical injection, RTUs, pneumatic controllers, and lighting.
Workhorse 24V 100Ah pack for the most common field loads: chemical injection pumps, RTUs, and pneumatic controllers.
24V 200Ah pack for high-current actuator and lighting loads at multi-well pads, with N+1 redundancy in parallel.
12V for instrumentation loops, RTUs, and direct drop-in replacement for flooded lead-acid banks.
Compact 12V 100Ah pack for instrumentation loops, RTUs and low-power wellhead devices. Drop-in replacement for flooded lead-acid banks.
High-capacity 12V 200Ah pack for sustained SCADA loads and solar hybrid sites where runtime matters more than footprint.
We build custom packs from 8V to 96V and 30Ah to 600Ah for unusual pad configurations. Same BMS, same warranty, same field-serviceable chassis.
